Lacquer and Dubplate Mastering

Original audio can be supplied either digitally or on analogue tape.

 

Learn More

Lacquer and Dubplate Mastering

Original audio can be supplied either digitally or on analogue tape.

 

Learn More

Requirements

If using digital files, the requirement is 24 bit and up to 192 kHz. All digital files must be in WAV format and consolidated into one track for each side. CD masters must be recorded in one uninterrupted session and must be Red Book compatible (playable on all standard CD players). Use the best quality blanks you can get (no CD-RW discs). If your 2 sides are on one CD, please indicate where the side break is and leave a two-second gap at the break.

Start IDs are required for each song.

Include accurate timings for each song and total side time including pauses. If this information is not provided or is inaccurate, the cutting engineer will have to spend extra time to determine these values before the lacquer can be cut. Extra time increases costs.

Any Equalization or level adjustments you want should be specified.

Provide a detailed list of songs per side.

Reach Us

101 – 4080 – 23 St. NE,
Calgary, Alberta, T2E 6W9, Canada

403-829-1273

Leave A Message